Filter
Top Products
E-20
Playing a Built-in Tune
Adjusting the Tempo
Each tune has a preset default tempo (beats per minute) that
is set automatically whenever you select a tune. While the
tune is playing, you can change the tempo setting to a value
in the range of 40 to 255.
To set the tempo
1
Use the TEMPO buttons to set the tempo.
: Increases the tempo value.
: Decreases the tempo value.
NOTE
• While the tempo value is flashing, you can also use the
number buttons or [+] and [–] to input a three-digit value.
Note that you must input leading zeros, so 90 is input
as 090.
• Pressing both the and TEMPO buttons at the same
time automatically returns the currently selected built-in
tune or rhythm’s default tempo.
To change the tone used for the
melody of a Song Bank tune
1
Following step 3 of the procedure on page E-19,
press the TONE button.
2
Find the tone you want in the TONE List, and then
use the number buttons to input its two-digit
number.
Example: To select “50 VIOLIN”, input 5, then 0.
• You can select any one of the keyboard’s 100 built-in
tones.
NOTE
• You can also use the [+] and [–] buttons to change the
melody tones.
• Specifying the tune number for the same tune that is
currently selected returns the melody tone to the default
setting for that tune.
To play all tunes in succession
1
Press the TONE button and RHYTHM button at the
same time.
• Playback starts from Song Bank tune number 00.
2
To stop tune play, press the START/STOP button.
NOTE
• While a tune is playing, you can use the number buttons
or [+] and [–] to change to another tune.
• You can play along with the tunes on the keyboard.
Flash
Tempo value
Indicator appears
Viol in
653A-E-022B
LK70S_e_19-25.p65 04.8.18, 11:04 AM20