Casio LK70S Musical Instrument User Manual


 
E-40
Using a SmartMedia Card
653A-E-042A
Your keyboard is equipped with a card slot that supports use
of SmartMedia
TM
memory cards. This makes it possible for
the keyboard to directly read commercially available SMF
data, which has been saved to a SmartMedia card from your
computer, for sing along and lessons. SmartMedia data can
be used the same way as built-in tunes.
This keyboard supports SMF (FORMAT 0) data.
IMPORTANT!
Reading SMF data from a SmartMedia card causes all
five user songs in the user area to be deleted and
replaced with the SMF data.
NOTE
SMF data is converted to a format that can be played by
this keyboard, and then stored in keyboard memory.
Whether or not the data can fit in keyboard memory
depends on the size of the converted data.
This keyboard cannot write data to a SmartMedia card.
The keyboard can manage up to 200 SMF data files.
IMPORTANT!
There are two types of SmartMedia cards: 3.3V and 5V.
Note that this keyboard supports use of 3.3V type
SmartMedia cards only.
Never try to use a 5V type SmartMedia card with this
keyboard.
Note you will not be able to store data to, delete data
from, or rename a SmartMedia card that has a write
protect sticker affixed to the cards write protect area.
Contacts
Write protect area
About SmartMedia
TM
Cards
You can purchase SmartMedia cards at most household
appliance stores, computer stores, etc.
SmartMedia cards are commercially available in capacities
ranging from 8MB up to 128MB.
Though a SmartMedia card is about the size of a postage
stamp, its capacity ranges from 8 to 100 times the capacity
of a floppy diskette.
The data read rate from a SmartMedia card is very fast.
SmartMedia
TM
is a trademark of Toshiba Corporation.
SmartMedia Card and Card Slot
Precautions
IMPORTANT!
Be sure to carefully read all documentation that comes
with the SmartMedia card for important information about
how to handle it.
Avoid storing and using SmartMedia cards in the
following types of locations. Such conditions can cause
corruption of data stored on the card.
Areas subject to high temperatures, high humidity, or
corrosive agents
Areas subject to strong electrostatic charge or
electrical noise
Whenever handling a SmartMedia card, make sure that
you never touch its contacts with your fingers.
If the data access lamp is lit and the message Pls Wait
is on the display, it means that data on the SmartMedia
card is being accessed by a save, read, or delete
operation. Never remove the SmartMedia card from the
card slot or turn off the keyboard while the card is being
accessed. Doing so can corrupt the data on the
SmartMedia card or even damage the card slot.
Never try to insert any type of card other than a 3.3V
SmartMedia card into the card slot. Doing so can
damage the keyboard.
Inserting a SmartMedia card that is charged with static
electricity into the card slot can cause malfunction of
the keyboard. If this happens, turn the keyboard off and
then back on again.
Number buttons
[
+
](YES) / [
](NO)
PLAY/STOP
STEP
SCORINGSTART/STOP
FUNCTION CARD
LK70S_e_32-44.p65 04.8.18, 11:04 AM40