Using the Function Menu
E-98
Specifies how many times notes or chords should sound
within one beat for arpeggio phrases played by the
arpeggiator (page E-23).
1, 2, 2S, 3, 4
*
, 4S, 6, 8
The setting value indicates the number of times within one
beat. Selecting an option that is only a value will sound the
note that number of times within one beat. Selecting “4”, for
example, will play with the rhythm 6666.
Selecting an option that includes the letter “S” will play a
shuffle. 2S plays and 4S plays .
• The availability of the settings for this item depends on the
arpeggiator type. Refer to the separate “Appendix” for
details.
Specifies whether arpeggiator play should be used for the
UPPER part keyboard or LOWER part keyboard when the
arpeggiator (page E-23) is used while the keyboard is split
between two tones (page E-15).
Specifies if accompaniment settings are recalled (oFF
*
) when
a registration setup (page E-62) is recalled, or if
accompaniment settings are not recalled (on).
Specifies if scale settings are recalled (oFF) when a
registration setup (page E-62) is recalled, or if scale settings
are not recalled (on
*
).
• You can directly display this group screen without going
through the function menu. While in the card mode (page
E-103), hold down the R-13 (FUNCTION) button as you
press the C-13 (MENU) button.
Specifies if a pre-count should sound (on) when playback of a
song file is started in the card mode (page E-103) or if a
pre-count should not sound (oFF
*
).
Specifies if a single song file should be repeat played (on)
during playback in the card mode (page E-103) or if a song file
should not be repeat played (oFF
*
).
You can batch save all user data in Digital Keyboard memory
to a memory card, or load all user data from a memory card to
Digital Keyboard memory.
See “To batch save all Digital Keyboard data to a memory
card” (page E-105) and “To batch load all Digital Keyboard
memory data from a memory card” (page E-106) for more
information.
See “Formatting a Memory Card” (page E-103).
See “To delete a file from a memory card” (page E-107).
See “To rename a file on a memory card” (page E-107).
ArpegSpeed (Arpeggiator Speed)
ArpegPart (Arpeggiator Part)
Upp
*
: UPPER part
Low :LOWER part
RegFltAcmp (Registration Filter: Accompaniment)
RegFltScal (Registration Filter: Scale)
26
67 67
Play/CardUtl (Playback, Card Utility) Group
PreCount (Song Pre-count Sound)
SongRepeat (Song Repeat Play)
AllData (All Data)
CardFormat (Card Format)
FileDelete (File Delete)
FileRename (File Rename)
CTK6000_e.book 98 ページ 2010年7月12日 月曜日 午後12時50分