Casio MA1007-A Electronic Keyboard User Manual


 
Using the Song Sequencer
E-90
1.
Display the event editor screen of the track you
want to quantize.
See “To select a track for editing” (page E-85).
2.
Press the C-11 (QUANTIZE) button.
This displays the “Quantize” screen.
3.
Use the dial or R-14 (–, +) buttons to change the
setting in the thick brackets (%) to “All”.
4.
Perform step 5 under “To quantize an individual
note event” on page E-89.
5.
Press the L-17 (START/STOP) button when you
want to play back with quantization applied.
Note that the actual data still has not been changed yet.
6.
Press the R-16 (ENTER) button.
7.
In response to the “Sure?” message that
appears, press the R-14 (YES) button to
quantize or the R-14 (NO) button to cancel.
1.
Display the event editor screen of the track that
includes the events you want to quantize.
See “To select a track for editing” (page E-85).
2.
If required, you can perform a song playback
operation at this time to check the range you
want to select for quanitization.
See “To play back a song from the event editor screen
(Quick Play)” (page E-85).
3.
Press the C-11 (QUANTIZE) button.
This displays the “Quantize” screen.
4.
Use the dial or R-14 (–, +) buttons to change the
setting in the thick brackets (%) to “Locator”.
This displays a range specification screen like the one
shown below.
If you have already specified a range using the locator
screen (page E-74), that range will be displayed on the
range specification screen.
5.
Use the R-17 (u, i) button to move the
cursor, and then use the dial or R-14 (–, +)
buttons to change the value at the cursor
position.
6.
Perform step 5 under “To quantize an individual
note event” on page E-89.
7.
Press the L-17 (START/STOP) button when you
want to play back with quantization applied.
Note that the actual data still has not been changed yet.
8.
After everything is the way you want, press the
R-16 (ENTER) button.
9.
In response to the “Sure?” message that
appears, press the R-14 (YES) button to
quantize or the R-14 (NO) button to cancel.
To quantize all note events in a track
To quantize all note events within specific
range of a track
Range start point Range end point
CTK6000_e.book 90 ページ 2010年7月12日 月曜日 午後12時50分