Casio MA1007-A Electronic Keyboard User Manual


 
Using the Song Sequencer
E-80
1.
Perform the procedure under “To start a track
editor operation” on page E-79 to display the
track editor menu.
2.
Use the R-17 (t, y) button to move the 0 to
“Copy” and then press the R-16 (ENTER)
button.
This causes the “Copy Track” screen to appear. At this
time the thick brackets (%) will be located at the
“Copy” setting.
3.
Use the dial or R-14 (–, +) buttons to specify the
track number you want to copy from.
4.
Press the R-17 (y) button to move the thick
brackets (%) to “To”.
An asterisk (*) next to a track number indicates that
there is already data recorded in that track.
5.
Use the dial or R-14 (–, +) buttons to specify the
track number you want to copy to.
6.
After everything is the way you want, press the
R-16 (ENTER) button.
If the copy destination track does not contain recorded
data, the copy operation is performed immediately.
If the copy destination track already contains recorded
data, the confirmation message shown below appears
asking if you want to overwrite the existing data.
Press the R-14 (YES) button to perform the copy
operation and overwrite the existing track or the R-14
(NO) button to cancel.
1.
In the song sequencer mode, use the R-17 (u,
i) buttons to select the lower numbered track
of those you want to combine.
As an example, we will combine Track 03 and Track 05
into Track 06. Here, select Track 03.
2.
Perform steps 2 and 3 of the procedure under
“To start a track editor operation” on page E-79
to display the track editor menu.
3.
Use the R-17 (y) button to move the 0 to
“Merge” and then press the R-16 (ENTER)
button.
This displays a “Merge Track” screen like the one
shown below. At this time the thick brackets (%) will
be located at setting
.
4.
Use the dial or R-14 (–, +) buttons to specify 05
(Track 05) for
.
Changing the value of
also causes the
value to
change.
5.
Press an R-17 (i or y) button to move the
thick brackets (%) to
.
6.
Use the dial or R-14 (–, +) buttons to specify 06
(Track 06) for
.
To copy one track to another track (Tracks 01
through 16 only)
To combine two tracks into a single track
(Tracks 01 through 16 only)
ABC
: One of the tracks to be combined (The track you
selected in step 1 is the initial default selection).
: Other track to be combined.
: Destination track of combined tracks.
CTK6000_e.book 80 ページ 2010年7月12日 月曜日 午後12時50分