Filter
Top Products
Assembling the Stand
E-29
13.
Tighten the screws you loosened in step 10 to
secure the corner brackets to the side panels.
IMPORTANT!
• Press down on the edges of the pedal unit as you tighten
the corner bracket screws.
1.
Plug the speaker box C cable into the
speaker connector on the bottom of the digital
piano.
2.
Making sure that the pedal unit cable plug is
oriented as shown in the illustration below,
plug it into the pedal connector on the bottom
of the digital piano.
• Use the H clips to secure the pedal cable to two
locations on side panel B.
NOTE
• When plugging into connectors, make sure that the plug
is inserted as far as it will go.
• When disconnecting the speaker cable, press the hook
(
) as pull the plug out.
1.
Slide the music stand under the two bolts on
the top of the digital piano as shown in the
illustration and then tighten the bolts.
To connect the cables
To install the music stand
H
C
1
2
B
PX720_03_e.fm 29 ページ ２００７年８月１０日 金曜日 午後２時２４分