Filter
Top Products
English
Playing the Digital Keyboard
E-11
You can use the voice pads to sound various sound effects or
even sounds you have sampled (page E-19). Use the voice
pads to add something extra to your performances.
1.
Press
bq
.
2.
Press
cs
and
ct
at the same time to enable the
voice pads.
•Pressing
cs
and
ct
at the same time again will disable
the voice pads.
• Be sure to make sure the voice pad function is enabled
before performing the next step. While voice pads are
disabled, buttons
bt
through
co
function as
registration memory buttons (page E-48). Performing
the following step with voice pads disabled will change
the setup of the keyboard (tone number, rhythm
number, etc.).
3.
Press a voice pad (1 through 5,
ck
through
co
)
to sound what is assigned to it.
There are four sets of voice pad sounds numbered
1 through 4 (see below). Each press of
bt
cycles through
sound sets 1 through 4.
Example: When Set 2 is selected
• While a sound set number is displayed, you can change it
using
bs
(10-key). If you do not perform any operation for a
few seconds after the indicator appears, the display will
return to the previous screen automatically.
Using the Voice Pads
Lit when on
Pad 1Pad 2Pad 3Pad 4Pad 5
Set 1
VOICE 1
(Tone 571)
*1
VOICE 2
(Tone 572)
*1
VOICE 3
(Tone 573)
*1
VOICE 4
(Tone 574)
*1
VOICE 5
(Tone 575)
*1
Set 2 Set 1 at various pitches
*2
Set 3 Same as Set 1 Set 1 sound, repeated
*3
Set 4 APPLAUSE GUNSHOT BONGO CONGA
TAMBOURINE
*1: If you performed melody sampling (page E-20) and
assigned the results to these tone numbers, the pad will
output the sampled sound.
*2: Pad 1: Perfect fifth up; Pad 2: Perfect fifth down;
Pad 3: Same as Set 1; Pad 4: Starting from a major third
down, gradually raises the pitch; Pad 5: Starting from one
octave up, gradually lowers the pitch
*3: Pad 3 gradually raises the pitch
bt ck cl cm cn co
Pad Se t