Filter
Top Products
Playing Built-in Songs
E-30
Use the following procedure to adjust the balance between
the volume of what you play on the keyboard and song
playback volume.
1.
Press
ct
and then use the
bs
(10-key) [4] (o)
and [6] (p) keys to display “Song Vol” (page
E-6).
2.
Use the
bs
(10-key) [–] and [+] keys to adjust the
song volume.
The procedure below lets you select the same keyboard tone
as the one being used in the song and play along with your
favorite tunes.
1.
After selecting a song, hold down
br
for about
two seconds until the displayed tone name
changes to the tone name of the song.
• If your currently selected tone is the same as the song
tone, the display contents will not change.
2.
Play along with song playback.
• If you select a song that uses different tones for left and
right hand play, the right hand part tone is assigned to the
keyboard.
You can turn off the right hand part or the left hand part of a
song during playback and practice playing along with the
remaining part.
1.
Press
bn
to select the part you want to turn off.
Each press of
bn
cycles through the settings shown
below.
2.
Press
bm
.
This starts playback in accordance with the setting you
selected in step 1.
• During playback with one part turned off, only the notes of
the part that is turned off are shown on the display.
You can transfer song data from your computer to the Digital
Keyboard and assign them to song numbers 153 through 162,
which are called “user songs”. After that, you can select user
songs for playback and for lessons (page E-31). For
information about transferring song data from your computer
to Digital Keyboard memory, see page E-62.
• For information about how to delete song data loaded from
a computer, see page E-57.
Adjusting the Song Volume
Playing with the Tone as Song Playback
Son
g
Vo l
Turning Off the Part of One Hand for Practice
(Part Select)
Increasing the Selection of Songs
(User Songs)
Right hand part off
Left hand part off
Both hand parts off
Both hand parts on