Filter
Top Products
3-3
Cisco VG224 Voice Gateway Software Configuration Guide
OL-5005-01
Chapter 3 Configuring with the Command-Line Interface
Configuring the Host Name and Password
Verifying the Host Name and Password
To verify that you configured the correct host name and password:
Step 1 Enter the show config command:
Router(config)# show config
Using 1888 out of 126968 bytes
!
version XX.X
.
.
.
!
hostname VG224
!
enable secret 5 $1$60L4$X2JYOwoDc0.kqa1loO/w8/
.
.
.
Check the host name and encrypted password displayed near the top of the command output.
Step 2 Exit global configuration mode and attempt to reenter it using the new enable password:
Router# exit
.
.
.
Router con0 is now available
Press RETURN to get started.
Router> enable
Password:
guessme
Router#
Tip If you are having trouble, ensure the following:
• Caps Lock is off.
• You entered the correct passwords. Passwords are case sensitive.