Cisco Systems VG350 Drums User Manual


 
4-7
Cisco VG350 Voice Gateway Hardware Installation Guide
OL-25970-01
Chapter 4 Installing the Cisco VG350 Voice Gateway
Mounting Tools and Equipment
Mounting Tools and Equipment
Obtain the following tools and parts to install a Cisco VG350 Voice Gateway:
Standard flat-blade screwdriver as required for attaching brackets to rack or wall
Phillips screwdriver for attaching brackets to a Cisco VG350 Voice Gateway
Mounting brackets and screws for 24-inch rack, if required:
Four telco machine screws, for installing the chassis in a rack (use the screw size required by
the rack)
Screws and anchors for wall-mounting, if required
Eight wood screws or other fasteners, for installing the chassis on a wall. An additional starter
screw can be used to facilitate wall-mounting.
ESD-preventive wrist strap
In addition, you might need the following external equipment:
Console terminal or PC with terminal emulation software
PC running terminal emulation software for administrative access
Modem for remote access
Analog voice RJ-21 cable
Ethernet switch
Modem for remote configuration
Unpacking and Inspection
Do not unpack the Cisco VG350 until you are ready to install it. If the installation site is not ready, keep
the chassis in its shipping container to prevent accidental damage.
The Cisco VG350, cables, printed publications, and any optional equipment you ordered might be
shipped in more than one container. When you unpack each shipping container, check the packing list
to ensure that you received all the following items:
Cisco VG350 Voice Gateway
Power cord, 6-foot (1.8-meter)
RJ-45-to-DB-25 adapter cable (labeled Console)
RJ-45-to-DB-9 adapter cable (labeled Auxiliary)
Rack-mounting brackets for 19-inch rack (one pair) with screws for attaching to chassis
Chassis guard for wall-mounting applications
Grounding lug and fasteners
Read Me First for Cisco VG350 Voice Gateway
Inspect all items for shipping damage. If anything appears damaged, or if you encounter problems when
installing or configuring your system, contact a customer service representative. (See the “Obtaining
Documentation” section on page -xv.)