Filter
Top Products
28 Platinum Sound Processor User Guide
!" Repeat the system check, Steps 1-3. If the microphone function is not
restored, reinsert the first cable, and replace the Headpiece.
3. Headpiece
To replace the Headpiece:
!" Turn the Program Switch to the off position.
!" Remove the Headpiece from the cable by holding the cable at its
strain relief portion and gently pulling the cable away from the
Headpiece.
!" Insert the two-pin plug into the replacement Headpiece. Take care to
match the larger pin on the plug to the larger hole of the Headpiece
connector.
!" Repeat the system check, Steps 1-3.
NOTE: Be sure the Processor is turned off before removing the
Headpiece cable.