Filter
Top Products
FlexWave65/112 Guitar Amplifier w/DSP and Channel Tracking
FlexWave 65/112 TECHNICAL SPECIFICATIONS:
Output Power Rating 65W rms @ 5% THD, 8Ω, 120 VAC
Gain High Gain Channel 110 dB, all controls @ 10
Overdrive Ch 88 dB, all controls @ 10
Clean Ch 58 dB, all controls @ 10
CD Input 29 dB
Maximum Input Signal Accepted 2.5 volts rms @ 400 Hz
Input Impedance 470k ohm
High Gain Channel Shape Control Proprietary Circuit
Overdrive Channel Low 20 dB range @ 80 Hz
Mid 15 dB range @ 1 kHz
High 20 dB range @ 10 kHz
Clean Channel Low 36 dB range @ 80 Hz
Mid 15 dB range @ 800 Hz
High 40 dB range @ 10 kHz
Speaker Size and Rating 12" Crate Custom Design 8 ohm
Power Requirements 120 VAC, 60 Hz, 95 VA
100/115 VAC, 50/60 Hz, 95 VA
230/240 VAC, 50/60 Hz, 95 VA
Size (H x W x D) 17.75 in/45.1 cm x 21.50 in/54.6 cm x
12.50 in/31.8 cm
Weight 36 lb/16.3 kg
The Flex Wave65/112 is covered with a durable Tolex material. Wipe it clean with a lint-free cloth.
Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
“Crate” is a registered trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks or
registered trademarks of their respective holders and are hereby acknowledged.
Service Information:
If you are having a problem with your Flex Wave65/112, you can go to our website
(www.crateamps.com) and click on Support for service information, or call 1-800-898-3211
during business hours (7 am to 5 pm PST, Monday-Friday). If you are outside of the U.S.,
contact your local distributor for technical support and service.
www.crateamps.com
@2007 LOUD Technologies Inc.
16220 Wood-Red Road NE • Woodinville, WA 98072
Part No. 0022724 Rev. A 01/07
12