Filter
Top Products
FlexWave65/112 Guitar Amplifier w/DSP and Channel Tracking
7
19. REVERB: Use this control to adjust
the amount of digital reverb effect. In its
fully counterclockwise position, the signal
will be “dry” (without reverb). As you rotate
this control clockwise, the amount of reverb
increases.
20. MOD: Use this control to select the
type of digital modulation effect. In its fully
counterclockwise position, the signal will
be “dry” (without modulation). As you rotate
the control clockwise, you can select from
The DSP Section
three chorus settings, three flanger settings,
or three phaser settings. The chart below
describes these effects.
21. DELAY: Use this control to select the
type of digital delay effect. In its fully coun-
terclockwise position, the signal will be “dry”
(without delay). As you rotate the control
clockwise, you can select from three slap
settings, three medium delay settings, or
three long delay settings. The chart below
describes these effects.
Effect Setting Description
Chorus 1 Chorus with low depth
Chorus 2 Chorus with medium depth
Chorus 3 Chorus with high depth
Flanger 1 Flanger with low depth
Flanger 2 Flanger with medium depth
Flanger 3 Flanger with high depth
Phaser 1 Phaser with low feedback
Phaser 2 Phaser with medium feedback
Phaser 3 Phaser with high feedback
Slap 1 Single short delay with low level
Slap 2 Single short delay with medium level
Slap 3 Single short delay with high level
Medium 1 Multiple repeats with low level and medium length
Medium 2 Multiple repeats with medium level and medium length
Medium 3 Multiple repeats with high level and medium length
Long 1 Multiple repeats with low level and long length
Long 2 Multiple repeats with medium level and long length
Long 3 Multiple repeats with high level and long length
Signal Path
MOD + DELAY + REVERB
SLAP LONG
MEDIUM
DELAYMODREVERB
POWER
CHORUS PHASER
FLANGER
EFFECTS
CD
INPUT
19 20 21