Dual XDMA6630 Microphone User Manual


  Open as PDF
of 32
 
22
Bluetooth
®
 Operation
XDMA6630 OPERATION
Overview
TheXDMA6630supportstheHFP(hands-freeprofile),A2DP(advancedaudiodistribution
profile)andAVRCP(audiovideoremotecontrolprofile).
Preparation
Beforeyoucanuseamobiledevicewiththisheadunit,itmustbepairedandconnected.
PleasemakesurethatBluetoothisactivatedonyourmobiledevicebeforeyoubeginthe
pairingprocess.Refertotheowner'smanualofyourmobiledeviceformoredetails.
Bluetooth Pairing
1)TopairaBluetoothenabledmobilephonetoyourheadunit,changetoBluetoothmode
bypressing ontheheadunitorpressMODEuntil"BLUE-TOOTH"isdisplayed.
2)Pressandhold ontheheadunitfor5seconds,until"PAIRING"isdisplayed,the
Bluetoothiconwillflasheverysecond.Theheadunitwillbegintobroadcastthepairing
signalfor90seconds.
3)CompletethepairingfromtheBluetoothmenuofyourmobiledevicebysearching
fornewdevices.Pleaserefertoyourmobiledeviceinstructionsforfurtherinformation
onBluetoothpairingandconnections.TheBluetoothiconwillilluminatesolidwhen
connected.
The BTM60 device name is "DUAL_BT"  
The Bluetooth passcode "1234"  
 
Compatibility
•DuetothedifferencesinBluetoothtechnology,somemobiledevicesmaybe
incompatibleorfunctionimproperlywhenusedwiththeXDMA6630.
Connecting a mobile device
•IftheAUTO-CONmenusettingissettoOFF,youmustpress toconnectyoudevice
afterpairing.
•FromBluetoothstandbymode,pressandhold  todisconnectyourmobiledevice.
•Ifyourmobiledevicebecomesdisconnected,press fromBluetoothstandbymodeto
reconnectyourmobiledevice.
•Toconnectapreviouslypairedmobiledevice:
1)Disconnectanymobiledevicesbypressingandholding for5seconds.
2)PressSELECT."DEVICENAME"willappearontheLCD.
2)Turnthevolumeknobtocyclethroughthelistofdevices1through8.
3)Press toconnecttothedesireddevice.Itmustbeinrangetoconnect.
Note:Whenadevicenumberisselected,iwilltakeafewmomentsforthedevicenameto
appearonthebottomlineoftheLCD.
 previous next