Filter
Top Products
MU STA NG
™
I II/ IV/ V
♫
You can also have a footswitch button assigned to
bypass the Reverb effect by adding on the 2-button
Mustang footswitch (see Six-Button Footswitching
options, below).
Tuner Mode—Press and hold the MODE button to activate
the Tuner. The screen and the footswitch both will display the
same tuner information so that you can look in either place to
tune your guitar. The footswitch will display the nearest note;
the button LEDs will indicate sharp and flat and "in tune" is
indicated when the green LED below the footswitch display
lights up.
Press any footswitch button to exit Tuner mode.
Two-Button Footswitch (0080997000)
Connect a 2-button footswitch to your Mustang amplifier
(included with the Mustang III, optional equipment for the
Mustang IV & V) to enable remote multi-function foot control.
Use the Utility menus to assign one of the following functions
to the 2-button footswitch:
• Select presets (up/down)
• Select Quick Access presets (QA1/QA2)
• Bypass effects (various combinations)
• Set TAP interval
Six-Button Footswitching options
Plug both a 4-button and a 2-button footswitch into your
Mustang amplifier to expand your remote control options.
By assigning different functions to each footswitch you can
create more than a dozen different foot control combinations.
For example, you could assign Quick Access presets to the
4-button footswitch and Up/Down presets to the 2-button
footswitch. Or you could bypass effects with the 4-button
footswitch and select presets with the 2-button footswitch.
The choice is up to you.
Utility Menus
Press the UTIL button to activate the Utility menus.
Press the UTIL button repeatedly to step through
each of the seven menus.
Quick Access #1 / #2 / #3 — Use the first three Utility menus
to choose Quick Access presets. You can then access those
presets quickly from the footswitches (see Footswitches,
above).
Two-Button Footswitch Mode — Use this menu to assign
functions to the two-button footswitch.
Memory Lock — Use the Memory Lock menu to prevent
accidental preset modifications. You will still be able to make
temporary changes to presets with Memory Lock ON, but you
won't be able to save those changes until Memory Lock is
switched OFF.
LCD Contrast — Use this menu to adjust the contrast of the
Mustang display.
About This Amp — This menu displays the Firmware version
currently running on the amplifier. Use this information to
determine if an update is available for your amplifier.
Speaker Outputs
Mustang V, only
The Mustang V head amplifier provides stereo speaker
outputs that must both be connected to a stereo speaker
cabinet such as the MustangV 412, with four 12" Celestion®
G12P Rocket 50 speakers (recommended), or two 8Ω speaker
cabinets capable of handling 75W each.
Aux / Phones Jacks
Auxiliary Input
You can use the Auxiliary jack to input audio into your
Mustang amplifier for accompaniment. Connect the
headphone output on your CD player or MP3 player to the
AUX jack using a mini-stereo cable. Use the volume control
6
f e n d e r . c o m