Filter
Top Products
2. FI-505 COURSE PILOT
10
2.2 Turning the Power On/Off
To power the instrument, press the MODE key. All LCD segments go
on and off and then the last-used display appears.
To power off the instrument, press the MODE and ENT keys together.
The timer appears and counts down from three seconds to one second,
and then the power goes off.
Power OFF sequence
2.3 Adjusting Brilliance and Contrast
1. Press the MODE and ENT keys together. The display for adjustment
of brilliance appears, with current brilliance setting flashing.
2. Within seven seconds of completing step 1, press the W key to lower
the brilliance, or the X/CLEAR key to raise it.
3. Press the MODE and ENT keys together. The display for adjustment
of contrast appears, with current contrast setting flashing.
4. Within seven seconds of completing step 3, press the W key to lower
the contrast, or the X/CLEAR key to raise it.
5. Press the MODE and ENT keys together to save the settings and
restore normal operation.
The brilliance and contrast will be the same on all units which are syn-
chronized. (For how to synchronize units, see page 32.)
3
2 1
POWE
R
OFF
Press MODE
and ENT
keys together
b
2
b=brilliance
Brilliance setting
(flashing)
C
3
C=Contrast
Contrast setting
(flashing)