Filter
Top Products
5. INSTALLATION
33
Setup2 menu items
Display Function Options
Default
setting
Software version of CPU1.
XX=program no. and x=program
version no.
--
Software version of CPU2.
XX=program no. and x=program
version no
--
Key beep on/off. 1: ON, 0: OFF 1(ON
Adjust brilliance automatically
with environment.
1: ON, 0: OFF 1(ON)
Enable/disable access to the
setup1 menu.
1: ON, 0: OFF 1(ON)
Terminal resistor on/off. 1: ON, 0: OFF 0(OFF)
Turn on/off synchronization of
FI-50 series instruments.
1: ON
Synchronize all FI-50
instruments having this
setting.
A: Synchronize FI-50
instruments having
this setting.
b: Synchronize FI-50
instruments having
this setting.
0: Turn off
synchronization.
1(ON)
Demo mode on/off.
To turn on/off, press the 4th key
about four seconds.
1: ON, 0: OFF 0(OFF)
Restore factory defaults.
To restore factory defaults,
press and hold down the 4th key
until “0” is replaced with “1” and
then press the key again within
two seconds.
1: ON, 0: OFF 0(OFF)
CAL
XXx
CAL
XXx
CAL
bE1
CAL
br1
CAL
SE1
CAL
rE0
CAL
Sy1
CAL
dE0
CAL
FA 0