Filter
Top Products
5. INSTALLATION
32
Setup2 menu
The setup2 menu contains items which once preset do not require fre-
quent adjustment. This menu is mostly operated the same as the setup1
menu. The only difference is how long the 3rd and 4th keys are pressed
to activate the menu.
1. Press the 3rd and 4th keys together (about 5-6 seconds) until the
software version screen for CPU1 appears. (See the illustration
below.)
2. Press the MODE key to select a menu item. Each press of the key
changes the menu item in the sequence shown in the illustration at
the top of the next page.
3. Use the 4th key to select ON or OFF as applicable.
4. To continue, press the MODE key to select another item.
5. To save settings and restore normal operation, press the 3rd and 4th
keys together.
MODE
CAL
dE0
CAL
rE0
CAL
Sy1
CAL
FA 0
Terminal
resistor
Synchronization
Demo
Factory
defaults
CAL CAL
XXX
CAL
bE1
CAL
br1
Software ver. no.
(CPU1)
Software ver. no.
(CPU2)
Key beep Auto brilliance
XXX
CAL
SE1
Setup1 menu
XXX=program and
program ver. nos.