Filter
Top Products
Connecting the battery leads
Rotating the logo badge
Gently pull out the logo badge, rotate it 90 degrees, and then
replace it in the bezel.
Attaching the UPS front bezel
Attaching the tower conversion stands
WARNING: To reduce the risk of personal injury or
damage to the equipment, the tower conversion stands
must be properly attached when the unit is installed as a
tower.
Using the preinstalled screws, attach the tower conversion stands to
the unit.
Continuing the installation
To continue the UPS installation, follow the instructions starting with
"Connecting the serial communications port (on page 4)."