Filter
Top Products
-2
OUTPUT LEVEL
LEFT
MAIN MIX LEVEL
RIGHT
-4
-10
-20
-7
LR
-30
CONTROL ROOM
PHONES/
MAIN MIX
ALT 3-4
2TK IN
TO
CTR ROOML
PWR
AUX SENDS
0
2
10
CLIP
4
7
0
0
1
ALT 3-4
TO MAINMIX
2TK
TO MAINMIX
+15
-
+15
-
LEVEL
SET
SOLO
ACTIVE
SOLO MODE
PFL
AFL
10
dB
-5
-10
-20
-25
-30
-40
-60
0
5
10
dB
-5
-10
-20
-25
-30
-40
-60
0
5
2
-
MAX
8
2TK IN
PH
-
8
+15
ALT 3-4ALT 3-4
EFX TO AUX1
-+15
8
-+15
8
AUX RTN 1AUX RTN 1
AUX RTN 2 (DFX)AUX RTN 2 (DFX)
12
38
29
27
28
30
31
32
34
33
35
36
37
40
39
4.19 AUX SENDS
These 1/4" sockets are used to send out the signal
from the AUX bus to external device such as effects
equipment, they also can be used as monitoring outputs
by connecting a power amplifier and monitorSpeaker.
23
4.20 CTRL ROOM OUTPUT
These 1/4" sockets are used to send the control
room signal to the studio monitor speakers or a
second set of PA.
24
4.21 PHONES
This socket will send out the mix signal to a pair
of headphones.
25
4.22 DSP FOOTSWITCH (for AMX-220FX model only)
This socket is used to connect external footswitch
for your convenient operation, it will activate/
deactivate the DSP module in this unit and function
same as DFX MUTE switch .
26
43
PHONES
1
2
AUX SENDS
L
R
CTRL ROOM
OUTPUT
DSP
FOOTSWITCH
25 26
23
24
4.23 AUX RETURN CONTROL
27
These two controls adjust the level of the signal
present at the AUX RETURNS 1&2 jacks.
The signal is summed, or mixed in to the main
L/R mix bus.
4.24 EFX TO AUX1
28
This switch will routes the signal that is present at
the AUX RETURN 2 jacks to AUX 1 output so that
the effects can be heard in the monitor mix.
4.26 2TK IN CONTROL
This control is used to adjust the level of 2TK IN
signal, which can be varied from - to MAX.
30
4.25 ALT 3-4 CONTROL
This control is used to adjust the level of the ALT
output, and the adjustable range is from - to +15dB,
this is another way to offer you extra independent
stereo submix with its own level adjustment knob.
29
4.27 AUX SENDS CONTROL
Both switches are used to determine the master
AUX SENDS levels. The adjustable range is from
- to +15dB. When the effect unit connected to mixer
has no input gain control, you can get a further +15dB
gain available from these AUX SENDS outputs.
31
4.28 OUTPUT LEVEL LED DISPLAY
This stereo 12 segments LED meter will indicate
the level of the overall output signal.
32
4.29 PHANTOM LED
This LED indicates when the phantom power is switched on.
33