Filter
Top Products
15dB @ 100Hz~8KHz
15dB @ 3KHz
15dB @ 500Hz
15dB @ 80Hz
15dB @ 12KHz
27
9. TECHNICAL SPECIFICATION
Mono input channels
Microphone input
Electronically balanced ,discrete input configuration
Frequency response
10Hz to 55KHz, 3dB
Distortion (THD&N)
Gain range
SNR (Signal Noise Rated)
Line input
Frequency response
Distortion (THD&N)
Sensitivity range
0.005% at +4dBu, 1KHz
0dB to 44dB(MIC)
115dB
Electronically balanced
10Hz to 55KHz, 3dB
0.005% at +4dBu, 1KHz
+15dBu to -45dBu
Stereo input channels
10Hz to 55KHz, 3dB
Line input unbalanced
Frequency response
Distortion (THD&N) 0.005% at +4dBu, 1KHz
Impedance Microphone input
1.4K ohm
Channel insert return
2.5K ohm
All other inputs
10Kohm or greater
Tape out
1K ohm
All other output
120 ohm
Equalization Hi shelving
Mid sweep
HI-MID
MID-Low
Low shelving
DSP SECTION A/D and D/A converters
DSP resolution
Type of effects
24 bit
24 it
Hall, Room, Vocal & Plate REVERBS
Mono & Stereo DELAY (max DELAY TIME 650ms)
Chorus, Flanger & Reverb MODULATIONS
REVERB+DELAY, REVERB+CHORUS
REVERB+FLANGER combinations
Presets
256
Controls
16-position PRESET Selector
16-position VARIATION selector
PEAK LED
MUTE SWITCH with LED indicator
Main Mix Section Noise (Bus noise )
Fader 0 dB, channels muted:-100.0dBr (ref.:+4dBu)
Fader 0 dB,all input channels assigned and set to
UNITY gain:-90dBr(ref.:+4dBu)
Max output
+22dBu balanced XLR,
+22dBu unbalanced,1/4" jacks
AUX Return gain range
OFF to +15dB
AUX Sends max out
+22dBu
Power supply
(AC/AC Adaptor)
Main voltage
USA/ Canada 100-120V~,60Hz
Europe 210-230V~,50Hz
U.K/Australia 240V~,50Hz
Power Consumption
22watts
Physical
Net weight
Dimension (W D H)
427mm 412mm 43mm
5.90kg for AMX-220
5.98kg for AMX-220FX