Filter
Top Products
– 23 –
The term “Multi-Timbral” is derived from the ability to play multiple
timbres simultaneously.
NOTE:
You can assign any sound of the CN2 piano to any channel in the way
you like by sending the correct Program Change Number to the CN2
piano from an external MIDI device. See page 26 for assignment of
sound and program number.
(1) Press the “MULTI” key while holding down the METRONOME
and SOUND SELECT buttons.
(2) While still holding down the METRONOME and SOUND SELECT
buttons, pressing the “off” key sets the Multi-Timbral mode to “off”.
If you press the “on” key, this function returns to “on”.
9. TRANSMIT MIDI PROGRAM CHANGE
You can set the CN2 piano if it should transmit Program Change
Numbers via MIDI when the sound is changed on the control panel.
(1) Press the “PROGRAM” key while holding down the
METRONOME and SOUND SELECT buttons.
(2) While still holding down the METRONOME and SOUND SELECT
buttons, pressing the “off” key sets the CN2 piano not to transmit the
program change data corresponding to the sound selected on the panel.
If you press the “on” key, this function returns to “on” and selecting a
sound will transmit the data.
(3) You can also transmit the desired program change number directly
by entering the number as a three digit number by using the number
keys while holding down the METRONOME and SOUND SELECT
buttons.