Filter
Top Products
26 KAWAI DIGITAL PIANO CN4
Recorder
To listen to both parts together select “Part 1&2”.
To play back an individual part, select the desired part using the
VALUE button first, then press the PLAY/STOP button to listen.
◆ NOTE If you don’t see an asterisk after each part you recorded or if your song
does not play back correctly, carefully reread the previous section on
recording to make sure you’re recording properly. You can use the LCD
display to help determine if you have a problem.
USING THE PLAY/STOP BUTTON TO START RECORDING
The PLAY/STOP button can also be used to start recording. In this way,
you can insert a blank bar at the beginning of the song.
Press the REC button to enable the piano to record first, then
press the PLAY/STOP button. On pressing the PLAY/STOP button,
the CN piano starts recording regardless of whether you press a
key or not.
5.3 ERASING A SONG
This function allows you to erase any song you do not want to listen to.
To erase a specific song or part, first press both the REC and PLAY/
STOP button. The LCD display will display the erase menu where
you select a song or a part to erase.
Select the song and the part to erase.
Use the MENU buttons to select the desired song, and use the
VALUE buttons to select the desired part to erase.
Press the REC button to erase. The LCD display will ask you if
you’re sure.
Confirmation to erase the song.
If you are sure you want to erase the song and part, press the REC
button again.
If you want to cancel the erase procedure, press the PLAY/STOP
button.
The data is being erased (deleted).
To Del Press REC
SONG1 Part=1&2
Sure? Press REC
SONG1 Part=1&2
Deleting
SONG1 Part=1&2