Filter
Top Products
36 KAWAI DIGITAL PIANO CN4
Touch, Transpose
and Menu Buttons
COMMON OPERATION
To select a function that you want to adjust, press either of the
MENU buttons. The LCD will display “1 Brilliance”, the first item
in the menu.
Press the MENU buttons again to select a different function to
edit.
Use the VALUE buttons to change value.
To exit the function menu, press any SOUND SELECT button.
◆ NOTE Once the power is turned off, all settings will be reset to the factory preset
values unless you use the “User Memory” function to save your current
settings. For more information about the “User Memory” function please
see page 43 in this section of the manual..
1. BRILLIANCE
Brilliance lets you adjust brightness of the preset sounds.
After selecting the “Brilliance” function by pressing the MENU
buttons, use the VALUE buttons to change the value to the desired
amount.
The LCD display shows the brilliance setting with a
number. “0” indicates the standard setting.
Brilliance can be set between -10 to +10. Plus settings produce a brighter
tone, minus settings produce a mellower tone.
Brilliance settings are global for all the preset sounds. You can not have
an individual setting for each sound.
2. LOWER OCTAVE SHIFT
This allows the octave of the lower part to be shifted up one, two, or
three octaves higher when you use the split function.
After selecting the “Lower Octave Shift” function by pressing the
MENU buttons, use the VALUE buttons to select your desired shift
range.
1 Brilliance
= +3
1 Brilliance
= +3