Filter
Top Products
Advanced settings | Don’t panic! – 33
English
3. When you are done editing the above settings, press the FUNCTION button
to exit.
NOTE: When the instrument is turned off, the MIDI channel is reset to channel 1.
HINT: You can memorize a different MIDI channel by choosing the Write Global
command in the SV-1 Editor.
DON’T PANIC!
In case MIDI notes remain stuck for problems in MIDI communication, keep
the EQUALIZER’s section ON/OFF button pressed until the stuck notes are
silenced. This is commonly called the MIDI Panic function.
CHECKING THE OPERATING SYSTEM VERSION
You may want to check the operating system version, to see if you have the latest
version installed.
1. Turn the SV-1 on.
2. When the instrument is on, press the SPEED and INTENSITY knobs in the
PRE-FX section.
The operating system version is always given in the format “n1.n2”, for exam-
ple “1.0” for major release 1, minor revision 0.
The number shown around the SPEED knob gives you the first part (n1),
while the number shown around the INTENSITY knob gives you the second
part of the operating system version number (n2).
SV1-100-UserGuide-EFGI.book Page 33 Tuesday, June 30, 2009 9:23 AM