Filter
Top Products
Reference Manual D AD 3220 B Version 1.0
Page 15
Multiple Units
When installing multiple MiniModule units it is
recommended you use the R FR 3005 Rack Frame 1
and / or R FR 3010 Rack Frame 2 options. Please
refer to the documentation supplied with these
options for details on electrical installation.
Settings and Control
The D AD 3220 B is configured via the integral 4-
position dip-switch. This is located on the bottom of
the module and can be accessed through the
cutout provided (fig 2)
1234
DIP Switch
ON
OFF
LED 2 LED 1
Channel 1 StatusChannel 2 Status
Switch Settings
Below the switch settings for the 4-position dip-
switch are defined. Please see the section following
the table for more detail on the switch function.
Switch Setting Function
ON Enable Local Adjustment
1
OFF Disable Local Adjustment
ON Dual 1 > 4 mode
2
OFF Single 1 > 8 mode
ON Not Used
3
OFF Not Used
ON Not Used
4
OFF Not Used