Filter
Top Products
Reference Manual D AD 3220 B Version 1.0
Page 19
Locate Function
For larger systems which may have multiple
MiniModules of the same type in a single rack, or
multiple rack systems on a large central control
system we have added a useful utility which will
help to visually locate a suspect module quickly
(When used in conjunction with the optional
control system and software)
Once the specific module has been selected on
the control system there is a locate button on the
top of the GUI:
Locate Function in Control System
When Locate is selected the status indicator on the
GUI and the module LED`s will flash yellow in the
following continuous sequence.
3 short flashes…. Pause…. 3 short flashes …
This uses the alarm LED located on the front of the
module and in some cases any channel or status
LED`s that may be used in the module.
Use of the locate function will not interfere with the
normal operation of the module.
For more details on this feature please check the
documentation supplied with the controller
software.