Filter
Top Products
4 Onyx 1220i
Features
REAR PANEL
1. AC POWER CONNECTION
2. POWER SWITCH
3. FIREWIRE CONNECTIONS
4. MAIN MIX XLR OUTPUTS
5. MAIN OUTPUT LEVEL (+4 dB/MIC)
6. AUX SEND 1 AND 2
7. AUX RETURN 1 AND 2
8. INSERT (CH. 1-4)
CONNECTION SECTION
9. MIC INPUTS
10. MONO LINE INPUTS (CH. 1-4)
11. STEREO LINE INPUTS (CH. 5-12)
12. CONTROL-ROOM OUTPUTS
13. MAIN MIX 1/4" OUTPUTS
14. ALT 3-4 OUTPUTS
15. TAPE INPUTS
16. TAPE OUTPUTS
17. HEADPHONE OUTPUT
CHANNEL CONTROLS
18. HI-Z SWITCH (CH. 1 AND 2 ONLY)
19. LOW CUT SWITCH (CH.1-4 ONLY)
20. 48V PHANTOM POWER (MIC ONLY)
21. GAIN CONTROL
22. SEND FIREWIRE PRE/POST EQ
23. CH.11-12 INPUT (LINE OR FW 1-2)
24. HIGH EQ LEVEL
25. MID EQ FREQUENCY (CH. 1-4)
26. MID EQ LEVEL (CH. 1-4)
27. MID EQ LEVEL (CH. 5-12)
28. LOW EQ LEVEL
29. AUX SEND 1 AND 2 LEVEL
30. PAN CONTROL
31. MUTE/ALT 3-4 SWITCH
32. –20 AND OL LEDS
33. CHANNEL FADER
34. SOLO SWITCH
MASTER SECTION
35. CONTROL ROOM SOURCE: MAIN MIX
36. CONTROL ROOM SOURCE: TAPE, FW 1-2, ALT 3-4
37. ASSIGN CONTROL ROOM SOURCE TO MAIN MIX
38. CONTROL ROOM LEVEL
39. PHONES LEVEL
40. LEFT/RIGHT LEVEL METERS
41. RUDE SOLO LIGHT
42. AUX MASTER SEND 1 AND 2 LEVELS
43. AUX SEND PRE/POST SWITCH
44. AUX MASTER RETURN 1 AND 2 LEVELS
45. AUX RETURN AUX 2 TO AUX1
46. POWER LED
47. TALKBACK MICROPHONE
48. TALKBACK LEVEL
49. TALKBACK DESTINATION: PHONES, AUX 1-2
50. TALKBACK ON SWITCH
51. MAIN MIX FADER
1. AC POWER CONNECTION
This is a standard 3-prong IEC power connector.
Connect the supplied detachable linecord to the power
receptacle, and plug the other end of the linecord into
an AC outlet. The mixer can accept
any AC voltage
ranging from 100 VAC to 240 VAC.
FIREWIRE
LR
POWER
43
CHANNEL INSERT
BAL/UNBAL
1
AUX RETURN
2
21
1
( PRE-FADER / PRE EQ TIP SEND / RING RETURN )
BAL/UNBAL
2
MAIN OUT
BALANCED
AUX SEND
LRLR
MAIN OUTPUT
LEVEL
MIC
+4dB
2. POWER SWITCH
Press the top of this rocker switch inwards to turn on
the mixer. The front panel power LED will glow with
happiness and the mixer will be fully operational.
1 2
3
4
5
6
8
7