Filter
Top Products
4 Onyx 1620i
Features
REAR PANEL
1. AC POWER CONNECTION
2. POWER SWITCH
3. FIREWIRE CONNECTIONS
4. MAIN MIX XLR OUTPUTS
5. MAIN OUTPUT LEVEL (+4 dB/MIC)
6. AUX SEND 1-4
7. AUX RETURN 1-4
8. INSERT (CH. 1-8)
CONNECTION SECTION
9. MIC INPUTS (CH. 1-8)
10. MONO LINE INPUTS (CH. 1-8)
11. STEREO LINE INPUTS (CH. 9-16)
12. CONTROL-ROOM OUTPUTS
13. MAIN MIX 1/4" OUTPUTS
14. ALT 3-4 OUTPUTS
15. TAPE INPUTS
16. TAPE OUTPUTS
17. HEADPHONE OUTPUT
CHANNEL CONTROLS
18. HI-Z SWITCH (CH. 1 AND 2 ONLY)
19. LOW CUT (CH. 1-8 ONLY)
20. 48V PHANTOM POWER (MIC ONLY)
21. GAIN CONTROL
22. SEND FIREWIRE PRE/POST EQ
23. CH. 15-16 INPUT (LINE OR FW 1-2)
24. HIGH EQ LEVEL
25. HIGH MID EQ FREQUENCY (CH. 1-8)
26. HIGH MID EQ LEVEL (CH. 1-8)
27. LOW MID EQ FREQUENCY (CH. 1-8)
28. LOW MID EQ LEVEL (CH. 1-8)
29. MID EQ LEVEL (CH. 9-16)
30. LOW EQ LEVEL
31. AUX SEND 1-4 LEVEL
32. PAN
33. MUTE/ALT 3-4 SWITCH
34. –20 AND OL LEDS
35. CHANNEL FADER
36. SOLO SWITCH
MASTER SECTION
37. CONTROL ROOM SOURCE: MAIN MIX
38. CONTROL ROOM SOURCE: TAPE, FW 1-2, ALT 3-4
39. ASSIGN CONTROL ROOM SOURCE TO MAIN MIX
40. CONTROL ROOM LEVEL
41. PHONES LEVEL
42. LEFT/RIGHT LEVEL METERS
43. RUDE SOLO LIGHT
44. SOLO MODE SWITCH: PFL/AFL
45. AUX MASTER SEND 1-4 LEVELS
46. AUX SEND 1-4 PRE/POST SWITCHES
47. AUX MASTER RETURN 1-4 LEVELS
48. AUX RETURN 3 TO AUX 1 SWITCH
49. POWER LED
50. AUX SEND 1-2 TO FW 13-14 SWITCH
51. TALKBACK MICROPHONE
52. TALKBACK LEVEL
53. TALKBACK DESTINATION: PHONES, AUX 1-4
54. TALKBACK ON SWITCH
55. MAIN MIX FADER
56. ASSIGN MAIN MIX TO FW 15-16
AC POWER NOTES
1. AC POWER CONNECTION
This is a standard 3-prong IEC power connector.
Connect the supplied detachable linecord to the power
receptacle, and plug the other end of the linecord into
an AC outlet. The mixer can accept
any AC voltage
ranging from 100 VAC to 240 VAC.
2. POWER SWITCH
Press the top of this rocker switch inwards to turn on
the mixer. The front panel power LED will glow with
happiness and the mixer will become fully operational.