Filter
Top Products
24
1642-VLZ3
1642-VLZ3
Appendix A: Service Information
Warranty Service
Details concerning the Limited Warranty are spelled
out on page 31 of this manual.
If you think your 1642-VLZ3 has a problem, please
check out the following troubleshooting tips and do your
best to confi rm the problem. Visit the Support section of
our website (www.mackie.com) where you will fi nd lots
of useful information such as FAQs, documentation and
user forums. You may fi nd the answer to the problem
without having to send your mixer away.
Troubleshooting
Bad Channel
• Are the channels assigned to the correct mix
(1-2, 3-4, L-R )?
• Is the fader up?
• Try unplugging any insert devices from the
INSERT [4) jacks.
• Try the same source signal in another channel,
set up exactly like the suspect channel.
Bad Output
• Is the level control (if any) turned up?
• If you’re listening to the C-R OUTS [9] or
PHONES [10] outputs, has a SOURCE selection
been made?
• If it’s one of the MAIN OUTS [14], try unplug-
ging its companion. For example, if it’s the 1/4"
output, unplug the RCA output. If the problem
goes away, it’s not the mixer.
• If it’s a stereo pair, try switching them around.
For example, if a left output is presumed dead,
switch the left and right cords, at the mixer
end. If the left is still dead, it’s not the mixer.
• Unplug everthing from the MAIN INSERT [13].
Noise
• Turn the channel faders and STEREO RETURN
knobs down, one by one. If the sound disap-
pears, it’s either that channel or whatever is
plugged into it, so unplug whatever that is. If
the noise disappears, it’s from your whatever.
Power
• Unplug the power cord and check the fuse.
Repair
Service for Mackie products is available at a factory-
authorized service center. Service for Mackie products
living outside the United States can be obtained through
local dealers or distributors.
If your 1642-VLZ3 needs service, follow these instructions:
1. Review the preceding troubleshooting suggestions.
Please.
2. Call Tech Support at 1-800-898-3211, 7 am to 5 pm
PST, to explain the problem and request a Service
Request Number. Have your serial number ready.
You must have an Service Request Number before
you can obtain warranty service.
3. Keep this owner’s manual and the detachable line-
cord. We don’t need them to repair the unit.
4. Pack the unit in its original package, including end-
caps and box. This is VERY IMPORTANT. Mackie is
not responsible for any damage that occurs due to
non-factory packaging.
5. Include a legible note stating your name, shipping
address (no P.O. boxes), daytime phone number, a
copy of your receipt, Service Request Number, and a
detailed description of the problem, including how
we can duplicate it.
6. Write the Service Request Number in BIG PRINT
on top of the box. Units sent without the SR number
will be refused.
7. Tech Support will tell you where to ship the unit for
repair. We suggest insurance for all forms of cart-
age.
8. You will need to contact the authorized service
center for their latest turn-around times. The unit
should be packaged in its original packing box, and
must have the Service Request Number on the box.
Once it’s repaired, the authorized service center
will ship it back by ground shipping, pre-paid (if it
was a warranty repair).
Note: Under the terms of the warranty, you must ship or
drop-off the unit to an authorized service center.
The return ground shipment is covered for those
units deemed by us to be under warranty.
Note: You must have a sales receipt from an authorized
Mackie dealer for your unit to be considered for
warranty repair.