Filter
Top Products
9
Trigger Pads
You can easily assign sounds from the keyboard to the trigger pads by using the Pad Learn function. This
can be useful if you want to use the trigger pads to send certain MIDI notes to trigger a sound in your virtual
instrument.
Memory Location
Control Assign
Modulation Rate
Pitch Bend Rate
Cancel
MIDI Channel
Sustain Mode
Oct = Octave
Oct = Program
Oct = Transpose
Backup
Store
0
1
2
3
4
5
6
7
8
9
Enter
Program Change
Velocity Curve
Control Maximum
Control Minimum
Bank MSB
Bank LSB
MIDI Panic
Pad Learn
To assign the MIDI note of a trigger pad:
1. Press the Edit button. It will illuminate to full-brightness.
2. Press the Pad Learn key.
3. If necessary, press the Pad Bank button to select the pad bank containing the desired pad.
4. Press a keyboard key to select the desired MIDI note.
5. Press the desired trigger pad to assign the chosen note to the pad. Your Axiom will automatically exit
Edit Mode.
MIDI Settings
Memory Location
Control Assign
Modulation Rate
Pitch Bend Rate
Cancel
MIDI Channel
Sustain Mode
Oct = Octave
Oct = Program
Oct = Transpose
Backup
Store
0
1
2
3
4
5
6
7
8
9
Enter
Program Change
Velocity Curve
Control Maximum
Control Minimum
Bank MSB
Bank LSB
MIDI Panic
Pad Learn
Global MIDI Channel
The "global" MIDI channel is the default MIDI channel over which Axiom sends MIDI messages. Because this
is a global setting, it applies across all memory locations, overridden only by custom channel selections for
controls in MIDI Mode.
To set the global MIDI Channel:
1. Press the Edit button. It will illuminate to full-brightness.
2. Press the MIDI Channel key.
3. Use the numerical keys (0–9) to enter the desired MIDI channel (1-16).
4. Press the Enter button to save the new global MIDI channel assignment, or press Cancel or Edit to exit
Edit Mode and discard any new settings.
MIDI Panic
When you trigger a MIDI Panic message, it sends an "All Notes Off" message on all channels and through all
outputs. This is useful when a connected hardware or software synthesizer has a stuck Note On.
To send a MIDI Panic message:
1. Press the Edit button. It will illuminate to full-brightness.
2. Press the MIDI Panic key. An "All Notes Off" MIDI message will be sent. Your Axiom will automatically
exit Edit Mode.
Pad Learn key
MIDI Panic key
MIDI Channel key