Filter
Top Products
9
CONNECTING AN EXTERNAL UNIT
Y
ou can connect an external unit to this unit, such as a
CD/CD+G player, etc. Simply connect an audio cable
(not included) from the Audio Input jacks on this unit to
the external unit's AUX OUT jacks. This will allow you to
broadcast the external unit's sound through this unit’s
speakers. Make sure both units are turned on and adjust
the volume using the Master Volume control.
NOTES:
• Connecting the unit to an external audio source will
allow you to broadcast the external unit’s sound
through this unit’s speakers.
• When connecting the external unit, refer to the owner’s
manual of the external unit, as well as this manual.
• When connecting the external unit, make sure the
power is off and both units are unplugged before
making any connections.
• Connect a CD+G player to utilize the Auto VOCAL
button, see the following page.
• The Line in cable cannot be connected when the Audio In cable is connected.
Insert your multimedia player into the Multimedia
Player Holder. Fish the included Line In Cable from
the rear of the unit and into the side or top of the
Multimedia Player Holder as shown.
OR
1
Connect the Line In Cable from the LINE OUT of
your multimedia player to the MEDIA IN jack on
the top of the amp.
Connecting the multimedia player will allow you to
hear its sound through this unit’s speakers.
2
USING A MULTIMEDIA PLAYER
CONNECTIONS (CONTINUED)