Filter
Top Products
11
Make any desired connections as
shown on pages 8 and 9. Press
the Power button to turn the unit
on; the Power indicator will light.
1
Rotate the ECHO control
clockwise to increase the echo or
counterclockwise to decrease the
echo.
4
If using a second microphone,
adjust MIC2 Volume control as
desired.
3
Adjust MIC1 Volume control as
desired.
2
Turn microphone’s ON/OFF
switch to the ON position. Repeat
for microphone 2, if desired.
5
Press the Auto VOCAL button to
activate the Vocal Auto feature
(when using an external unit with
CDG). When activated, the vocals
on a multiplex recording are
muted as soon as the singer
begins singing. When the singer
stops singing, the vocals are
automatically unmuted.
6
Turn on the external unit and/or
multimedia player and sing or talk
into the microphone (s) and you
will hear both the external
unit/multimedia player and the
microphone.
7
If a Guitar is connected, set the
desired volume using the
GUITAR Volume control.
8
Adjust the MASTER VOLUME
control 1 as desired; this will
control the overall volume of all
connected units/microphones.
Press the Power button 2 to turn
the unit off; the Power indicator
will turn off.
2
1
9
OPERATION (CONTINUED)