Filter
Top Products
6
ASSEMBLY
Screw the Lower Stand Bar into the Amp and
rotate clockwise until tight.
1
Unscrew the Top Stand Connector from the Upper
and Middle Stand bars. Insert the Wire Clip with
Mic Holder onto the Middle Stand Bar.
2
Lower the Top Stand Connector and then rotate
clockwise to tighten.
3
Insert the Wire Clip onto the Lower Stand Bar.
4
Unscrew the stand connector and insert the Middle
Stand Bar into the Lower Stand Bar, making sure
to align the tabs marked A and B in the illustration.
A
B
5
Lower the Stand Connector and rotate clockwise to
tighten.
6