Nady Systems 2W1KUHT Microphone User Manual


 
4
Quick User Controls Guide
2W-1KU Receiver: Front View
RECEIVER 1
3 4 43 6
12
13
GROUP CHANNEL VOL
8 9 10 11
GROUP CHANNEL VOLGROUP CHANNEL VOL
2W-1KU DUAL
Tr ue Diversity
RECEIVER 2
7
1 15
2 2
1. IR Infrared LED transmitter window for linking
the RX to the TX for frequency download
2. AUTO-SCAN / ASC (IR SYNC) BUTTON Long press
(hold ~2 seconds) for AUTO-SCAN to locate a
clear channel to use. Short press (~1 second)
to make the IR link download the receiver’s
selected frequency to the TX. To download,
position the HT-1KU/BT-1KU transmitters’
IR Window (36/45) about 6-12” away from the
RX IR Window (1). Press the ASC Button (2) once
and wait one second for the RX to respond.
If the download is successful, the RX will
show one of the Diversity Antenna Icons (8/13)
and full RF LCD Bars (12) on the LCD Display (7).
3. SET BUTTON To scroll through the LCD menu
and set the selected program/function
4.
UP BUTTON To change the receiver
LINE output VOL level, GRP/CH up by
one step at a time
DOWN BUTTON To change the receiver
LINE output VOL level, GRP/CH down by
one step at a time
5. AF/PEAK LEDS Shows GREEN LEDs for normal
audio and PEAK RED LED for maximum audio
level allowable
6. POWER BUTTON Press for one second to turn
both receivers ON-OFF
7. LCD DISPLAYS For indication of A-B Diversity,
GRP (00-09)/CH (00-99), RF signal strength
indicator 1-6 bars, and Volume Levels (0-63)
8. DIVERSITY A INDICATOR Indicates receiver A
is active when transmitter is on
9. FREQUENCY GROUP Indicates selected GROUP
from 00-09
10. FREQUENCY CHANNEL Indicates selected
CHANNEL from 00-99
11. SUM VOLUME LEVEL Indicates selected LINE
output level from 00-63, (63 is loudest output)
12. RF SIGNAL METER Indicates received signal
strength level from 1-6 bars, (full 6 bars shows
strongest incoming RF signal)
13. DIVERSITY B INDICATOR Indicates receiver B
is active when transmitter is on