Nady Systems 2W1KULTO Microphone User Manual


 
16
Specifications
SYSTEM OVERALL SPECIFICATIONS
Operating Frequency Range
(U.S.) Band 1: 672.000-696.975MHz, (Int.) Band 2: 795.000-819.975MHz
Freq. Synthesized (1000 channels switchable) 25kHz/step
PLL System Frequency Stability <0.005%
Frequency Response 30Hz-18kHz +/-3dB
Dynamic Range 120dB
Harmonic Distortion <0.5%
Modulation FM (F3E) +/-25kHz normal, +/-75kHz max
Operating Range 150-250 feet typical, 500+feet max line-of-sight
2W-1KU RECEIVER SPECIFICATIONS
Receiver System Dual conversion Super Heterodyne with True Diversity
(two complete receiver sections with optimum audio selected)
Selectivity 60dB, normal +/-75kHz offset
Image Rejection -70dB, minimum
Sensitivity -107dBm, normal
Spurious Rejection 65dB, normal
Mute Threshold -65dBm to -95dBm (adjustable)
Controls UP/DOWN selects, SET, IR Sync, Power ON/OFF buttons,
MUTE Level control
LCD Display
Dual backlight LCD panels indicating selected Group/Channel, Received
RF levels, A/B diversity, and unbalanced receiver Out Volume levels
AF/PEAK LED Display 5-segment LED tree indicating received audio levels from transmitter
Audio Output Level Unbalanced output: LINE Level output adjustable
Balanced output: MIC level output fixed
Output Impedance Balanced and unbalanced: 600 Ω
Power Requirement 16VDC/0.8A
Antennas Dual BNC right angle
Dimensions 17”W x 7.5”D x 2”H (43.2cm x 19.1cm x 5.1cm)
Weight 4.08 lbs (1.85 Kg)
Housing Construction Metal
HT-1KU HANDHELD TRANSMITTER SPECIFICATIONS
RF Output Power HI/LOW selectable
HI: +14dBm (25mW typical), LOW: +4dBm (2.5mW typical)
Harmonic and Spurious Emission -50dBc normal
Audio Input Levels 24mV for +/- 25 KHz deviation
Impedance 6.0 kΩ
Controls Power ON/OFF, RF Power HI/LOW switches, Set/Up/Down
LCD Display Group/Channels/ Input Volume/ Battery Levels
Antenna Type Integral
Battery Type 2 x AA alkaline batteries operation
Battery Life 8-10 hours typical
Dimensions 10”L x 2”D (25.4 cm x 5.1 cm)
Weight (w/o batteries) 11 oz (0.312 kg)
Housing Construction Metal
BT-1KU BODYPACK TRANSMITTER SPECIFICATIONS
RF Output Power Hi/Lo selectable
HI: +14dBm (25mW typical), LOW: +4dBm (2.5mW typical)
Harmonic and Spurious Emission -50dBc normal
Audio Input Levels (Lapel/Lavaliere—LT)/ (Headmic™ LT/HM)/ (Instrument—GT)
Input Impedance 5kΩ (Lav Mic), 500 kΩ (Instr.)
Controls Power OFF/MUTE/ON, RF Power HI/LOW switches, Set/Up/Down
Input Connector Mini 3.5mm with locking nut
LCD Display Group/ Channels/ Input Volume/ Battery Levels
Antenna Type External fixed
Battery Type 2 x AA alkaline batteries operation
Battery Life 8-10 Hours typical
Dimensions 2.5”W x 3.25”H x 1-13/16”D (6.35cm x 8.3cm x 1.82cm)
Weight (w/o batteries) 3.8 oz (0.108 kg)
Housing Construction Metal
Specifications subject to change at any time without prior notice for purposes of product improvement