Filter
Top Products
CM100
- The Leader in DJ Technology
©1999 Industries - 8 - http://www.numark.com
MIXER FEATURES
1
2
3
4
5 6
7
8
10
9
13
11
12
14
15
17
16
18
19
20
21
22
23
24
25
26
We have divided this section into various functional
blocks: Inputs, Microphone, Crossfader, Equalizer, Outputs,
and Headphone Cueing. It is important to learn how each of
these work.
INPUTS
1. Input faders - control individual source levels in the
mix.
2. Input Toggle Switches - select which source will be
live to that channel based on what you have connected to
the rear panel input section.
3. Pre-fader Gain Controls – adjust the pre-fader
volume for cleaner sound.
MICROPHONE
4. Mic Gain Controls – The DJ Mic Fader controls
the DJ Mic volume for the Neutrik™ “Combo”
connector. The Mic 2 Fader controls the Mic volume
for the 1/4” connector on the rear of the mixer.
5. Mic Talkover/On/Auto-Talkover Switch –
controls DJ Mic only. Mic 2 activation is controlled only
through the Mic 2 level fader.
Talkover turns down the input level of your music
sources from Channels 1-4.
Auto-Talkover automatically reduces the input level of
Channels 1-4. This works with the talk-over
sensitivity adjustment. Talkover is very useful for
making announcements without adjusting any levels.
6. Talkover sensitivity adjust – determines the point
in which auto-talkover activates. The more sensitive the
adjustment, the quieter you need to speak into your
microphone to activate auto-talkover.
7. Treble and Bass Controls – for fine-tuning the tone
of your voice on both mics through the sound system.
The controls are detented for setting tone "flat". For best
results, use a dynamic cardioid microphone.
8. Neutrik™ “Combo” connector - allows connection
of either a 1/4” jack or an XLR jack. This is ideal for
connecting an XLR gooseneck directly into the mixer.
CROSSFADER
9. Crossfader Assign Knob - determines which input
channel will be heard when the crossfader is moved
towards the knob.
Note: All channels not assigned will remain active.
10. Replaceable Crossfader - achieves clean segues
between the two input channels selected by the Crossfader
Assign.
In this example "Hard left" selects Channel 1 and "Hard
right" selects Channel 4. With the crossfader centered,
both assigned channels are live. Use the crossfader for fast
and seamless segues from one selected channel to the
other.
Note: The crossfader is user replaceable in case of failure.
Simply unscrew the two large screws that hold it in place,
lift it out and disconnect its cable. Re-attach the new
crossfader and screw the mounting plate back onto the unit
- you’re back in business!
11. Fader Start – activates the crossfader to send play and
cue commands to your auto-start Numark CD player or
other popular brand. For fader start, attach your mixer to a
remote start CD player using industry standard
1/8”(3.5mm) cables. When you move the crossfader
toward the active channel, the attached CD player will
start. When it is moved away, that side will cue (similar
to pressing the cue button).