Filter
Top Products
3
INTRODUCTION
Welcome to the X6 professional 2-channel mixer. Here are some of the features that you will come to love about this device:
24-bit digital mixing with noise-free controls
12 effects (6 for Channel 1/Channel 2; 6 for Mic/Aux), routable to Channel 1, Channel 2, Mic/Aux, or Master
Comprehensive, easy-to-use effects interface includes beat sync tap button, wet/dry fader, and rotary parameter control
Steep 3-band EQ on each input channel with EQ Kill switches
Variety of inputs (2 phono with phono defeat switch, 2 line, and 1 mic/stereo aux)
Smooth crossfader with continuous rotary slope control and reverse switch
Look-ahead peak limiting on headphone and master outputs
We hope that the X6 serves you well for many years to come.
Sincerely,
The People of Numark
BOX CONTENTS
X6
AC Power Adapter
Quickstart Guide
Safety & Warranty Information Booklet
REGISTRATION
Please go to http://www.numark.com to register your X6. Registering your product ensures that we can keep you up-to-date
with any last-minute product developments and provide you with world-class technical support, should you run into any
problems.
GROUND RULES
1. Make sure all items listed in the BOX CONTENTS section are included in the box.
2. READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.
3. Study the connection diagram in this guide.
4. Place mixer in an appropriate position for operation.
5. Make sure all devices are turned off and all faders and gain knobs are set to “zero”
6. Connect all stereo input sources as indicated in the diagram.
7. Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.
8. Plug all devices into AC power.
9. Switch everything on in the following order.
• audio input sources (i.e. turntables, CD players, etc.)
• mixer
• last, any amplifiers or output devices
10. When turning off, always reverse this operation by,
• turning off amplifiers
• mixer
• last, any input devices