Filter
Top Products
NASHVILLE
ª
1000 SPECIFICATIONS:
6
Power Amplifier Section:
Rated Power and Load:
300 W RMS into 4 Ohms (with DDT compression)
190 W RMS into 8 Ohms (with DDT compression)
2 Ohms operation not recommend
Frequency Response:
+0,-3 dB, 20 Hz to 20 kHz @ 250 W RMS into 4 Ohms
Total Harmonic Distortion:
Less than 0.3%, 1 W to 300 W RMS, 20 Hz to 20 kHz, 4 Ohms
DDT Dynamic Range:
Greater than 20 dB
DDT Maximum THD:
Below 0.5% THD for 6 dB overload
Below 1% THD for 20 dB overload
Hum and Noise:
Greater than 95 dB below rated power (A-weighted)
Power Consumption:
360 W, 50/60 Hz, 120 VAC (domestic)
Preamp Section:
The following specs are measured @ 1 kHz with the controls preset as
follows:
Master Gain @ 10
Low EQ @ 0 dB
Mid EQ @ 0 dB
Mid Shift @ 600 Hz
High EQ @ 0 dB
Presence EQ @ 0 dB
Reverb @ 0
Nominal levels are with Pre Gain @ 5
Minimum levels are with Pre Gain @ 10
Preamp High Gain Input (no pad):
Impedance: High Z, 220 k Ohms
Nominal Input Level: -24 dBV, 60mV RMS
Minimum Input Level: -48 dBV, 4 mV RMS
Maximum Input Level: +8 dBV, 2.5 V RMS
Preamp Low Gain Input (-10 dB pad):
Impedance: High Z, 68 k Ohms
Nominal Input Level: -14 dBV, 188 mV RMS
Minimum Input Level: -38 dBV, 13 mV RMS
Maximum Input Level: +18 dBV, 8 V RMS
Pre EQ Patch Send:
Load Impedance: 10 k Ohms or greater
Nominal Output Level: -14 dBV, 0.2 V RMS
Pre EQ Patch Return:
Impedance: High Z, 220 k Ohms
Designed Input Level: -14 dBV, 0.2 V RMS
(Switching jack provides send to return connection when not used.)
Post EQ Patch Send:
Load Impedance: 10 k Ohms or greater
Nominal Output Level: -9 dBV, 0.35 V RMS
Post EQ Patch Return:
Impedance: High Z 1M Ohms
Designed Input Level: -9 dBV, 0.35 V RMS
Preamp Output:
Load Impedance: 1 k Ohms or greater
Nominal Output Level: 0 dBV, 1V RMS
Power Amp Input:
Impedance: High Z, 25 k Ohms
Designed Input Level: 0 dBV, 1V RMS
(Switching jack provides preamp output to power amp input
connection when not used.)
System Hum and Noise @ Nominal Input Level:
(20 Hz to 20 kHz unweighted)
Greater than 80 dB below rated power
Equalization:
Low: ±15 dB @ 45 Hz, shelving
Mid: ±15 dB @ mid shift frequency, boost/cut
Mid Shift: 150 Hz to 1.5 kHz
High: ±15 dB @ 6 kHz (special EQ)
Presence: ±15 dB @ 10 kHz, shelving
External Footswitch Functions:
Select Effects: Post EQ Effects Loop defeat
Reverb: Reverb defeat
Dimensions and Weight (H x W x D):
20.5" x 26.5" x 11.375"
52.07 cm x 67.31 cm x 28.90 cm
Weight:
57.1 lb. (25.90 kg)