Filter
Top Products
GK310 3
3. Press the [DEMO ALL] button to start a chained Demonstration. The display
shows the first Demo Song number:
Playback starts automatically from the first Demo song and continues non stop
until you either change demo or stop the playback.
4. Press the [DEMO ALL] button again to stop the playback.
Select a single Demo Song
1. Select SONG mode by pressing the [VOICE/STYLE/SONG] button as many
times as necessary until the right display arrow points to the SONG function.
The number of the first demo song available is shown as above.
2. Use the numeric keypad to input the two-digit number of a demo song.
For example, to select Song 35, LONG, LONG AGO, input 3 then 5.
For a list of Demo Song names, refer to the Demo Songs table in Appendix C.
3. Press the [START/STOP] button to start the demo song.
You can also use the [DEMO ALL] button to start the playback.
If you use the [START/STOP] button to start the Song, it will play as an endless
loop, restarting after it reaches the end. [DEMO ALL] starts the chained Demo
Songs from the selected song.
During the demo playback, you can press the [+/ON] button to step to the next
demo song or the [–/OFF] button to step back to the previous one.
While the demo plays, all the control panel buttons, except [DEMO ALL],
[MELODY OFF] and the [+ON]/[–OFF] buttons, are temporarily disabled.
Play along with the Demo Song
1. While the demo song is playing, press the [MELODY OFF] button to turn off the
melody and start to play on the keyboard.
This button is useful if you want to play the melody yourself, or if a singer wants
to sing along with the backing only.
2. Use the [TEMPO ] buttons to adjust the Tempo of the selected demo song.
3. Press the [MELODY OFF] button again to restore the melody of the demo song.
4. Press the [START/STOP] or [DEMO ALL] button to stop the playback.
1
2
INCREASE
TEMPO
DECREASE
TEMPO