Filter
Top Products
Generalmusic PRO 1/PRO 2 Page 19
Tone control
(
PRO 1 model only
) Brilliance controls
The BRILLIANCE controls on the PRO 1 model allow you to adjust the brightness of the instrument’s tone.
BRILLIANCE
When both LEDs are off, the tone of the instrument is normal. Press the + button for a brighter tone and the -
button for a softer tone.
(
PRO 2 model only
) EQ Section
The EQ section of the PRO 2 allows you to accurately adjust the tone color of the sound according to taste. The
effects you create with the EQ will be saved into memory when you store a performance. In this way, recalling
different performances will automatically adjust the EQ settings according to the way they were when that
performance was saved.
The EQ ON/OFF button allows you to disable the effect of the EQ section. Turning this button off will give the
equivalent sound of all the EQ sliders being set to mid position, (flat).
NOTE: Because the EQ settings are recalled along with a performance, the “shape” of the EQ will sometimes
be different from the actual positions of the physical sliders. To look at the real “shape” that you’re currently
hearing, go to the “Lock EQ” screen in the MASTER/MIDI section. This will show you a graphic representation
of the EQ shape which is currently in effect.
If the current EQ shape is different from the slider positions as described above, slightly moving each slider
will “update” the position of that slider.
NOTE 2: Because the EQ section is digital, it is quite normal to hear some noise, (called “zipper noise”), if
these sliders are moved while a sound is being played.