Peavey pRP 7 Electronic Keyboard User Manual


 
5
Playing the pRP7
Connect the audio cables
The pRP7 does not incorporate an internal amplification system, there-
fore you must either play using headphones or connect to a suitable
external amplification system.
Connect the audio outputs to your amp. system (mixer, powered
speakers, etc.) using audio cables with standard 1/4” jacks. Use RCA
jacks to connect to domestic stereo units. For mono reproduction,
connect to the Right/M jack.
Headphone jack
If you are not playing connected to an external amplfication system, plug
a set of headphones into the Phones jack to play in total silence without
disturbing others in the same room. Use a mini jack1/4” adapter for
Walkman or MidiDisc headphone sets. The Phones jack is located on
the rear connections panel.
Use the Volume control to adjust the Headphones volume.
Connect the power supply
Connect the Generalmusic power supply unit to the 12V. D.C. jack.
Turn the instrument on
To turn the pRP7 on, press the ON/OFF switch located on the rear
connections panel.
After a short period, the instrument will be ready to play the Grand Piano
preset. The LED of the Grand Piano Preset button will be on and the 3-
digit LCD display will show a tempo setting as an indication that the
instrument is on.
In this power up condition, you will be able to play a piano sound
(GrandPiano) across the entire keyboard without carrying out other
operations.
Adjust the overall volume
Use the VOLUME control knob to adjust the overall volume level.
Sliding the VOLUME control knob to the right will increase the overall
volume, while sliding to the left will decrease it.
LED on