Filter
Top Products
12 – Pyle Pro Mixer Owner’s Manual
Troubleshooting
Your mixer should require very little maintenance. If you have problems, refer to the chart below
for possible solutions. If you cannot solve the problem, contact a qualified technician for assistance.
Care and Maintenance
Your Pyle Pro Mixer is an example of superior
design and craftsmanship. The following
suggestions will help you care for your mixer
so you can enjoy years of use:
• Keep the mixer dry. If it gets wet, wipe
immediately.
• Use the mixer only in well-ventilated
installations.
• Handle the mixer gently and carefully -
do not drop!
• Keep the mixer away from dust and dirt.
• Wipe occasionally with a damp cloth to
keep it looking new. Do not use harsh
chemicals, solvents or detergents!
Please complete warranty card, detach and return
PROBLEM POSSIBLE SOLUTION
Hum from PHONO
• Check that the turntable’s ground wire (usually black or green) is
fastened securely to the GROUND SCREW on the mixer input
panel
No signal from an
audio input
source
• Check the control setting
• Check the connection between the mixer and the input source
Nothing works • Check the AC connection. Make sure the AC outlet is “live.”
• Check the power connection to the rest of the system
(receiver/amplifier, etc.)
Hum from other
source
• Make sure there are no low level inputs connected to the LINE
input jacks
Feedback is
present
• Move the microphone further away from the output speakers,
or use a directional microphone
PYLE PRO Audio, Inc.
1600 63rd Street
Brooklyn, NY 11204
Place
Stamp
Here