Filter
Top Products
Your PYLE PRO Series Performance Mixer
is a sophisticated control center, perfect for mixing sound from multiple playback sources such as
microphones, tuners, CD players, turntables or the audio outputs from a VCR. This mixer is ruggedly
constructed for home or professional use. Wide range volume controls permit you to adjust sound levels
accurately to achieve just the right mix for playing through your speaker system or for recording.
Please read this manual thoroughly before you attempt to set up and use the mixer. It contains a
range of suggestions and instructions to insure safe usage. Set up and used properly, you can expect
years of trouble-free service from this product.
Input/Output Features: PYD1002/1005
Stereo Line Inputs let you connect most high-level audio
sources, such as CD players, tape deck, tuner or VCR.
PHONO Stereo Inputs for using a turntable with a magnetic
cartridge
MIC2 Microphone rear panel
connector permits you to connect a
balanced or unbalanced low
impedance microphone with 1/4” plug.
Ground Screw for turntables
Output Jacks to connect the mixer to a
receiver or amplifier – choose to use cables
with either 1/4” jacks or RCA plugs.
Zone Output Jacks to connect the mix er
to a second receiver or amplifier powering
speakers in the DJ booth or in a remote
location(PYD-1005)
Record Output Jacks to connect the
mixer to a tape deck for recording the
mixed program
i – Pyle Pro Mixer Owner’s Manual
Owner’s Manual Table of Contents
Input/Output Features
Features and Controls: PYD-1002
Features and Controls: PYD-1005
Presetting Controls Before Use
Connecting the Outputs
Playing the Mixer’s Output Signal
Recording the Mixer’s Output Signal
Monitoring the Mixer’s Output Signal in DJ Booth
(PYD-1005)
Connecting the Mixer Inputs
Connecting the Lamp
Using Headphones
Using the Mixer Controls
Using the Microphone
Using the Crossfader
Using the Tone Controls
Using the Kill Frequency Switches
(PYD-1005)
Using the Zone Level Control (PYD-1005)
Using the Master Balance Control(PYD-1005)
Using the Master Level Control
Dual Meter Modes
Using the Punch Controls
(PYD-1005)
Troubleshooting
Care and Maintenance
Specifications
Warranty
i
1
2
3
4
5
6
8
8
9
10
11
12
13