Filter
Top Products
4 – Pyle Pro Mixer PYD1911/1955 Owner’s Manual
Features and Controls: MP3 Player
Installing the MP3 Driver
1. Connect the USB DATA CABLE with the used computer.
2. Connect the USB DATA CABLE with the mixer and turn it on.
3. If your computer i s equipped with the Windows 95/98/98SE, please download the MP3 driver at
WWW.PYLEAUDIO.COM; If your computer is equipped with the Windows ME/XP/2000, this procedure
is not required.
4. The windows will get new hardware and install the MP3 driver automatically.
Operating the MP3
1. Connect the USB DATA CABLE to the mixer and the used computer, and turn on the mixer.
2. get to the "PORTABLE DISK" in the Windows explorer.
3. check the size of portable disk by clicking the right button with the pointer over the portable disk
icon, and open the "PROPERTIES".
4. Go on to the next step #5 with everything being correct, otherwise, move the pointer on the
portable disk icon and click the right mouse button, and do "FORMAT" complete than "DEFRAGMENTER"
if the properties going down.
5. Please copy the song files in the computer and than go to portable disk, click PASTE, the computer
will download the files to the portable disk automatically.
6. If you want to download other types of files, please just repeat the last step. If you want to move
out the files, please CUT the files and PASTE them to the location you wnat them to be.
7. If the files are from the internet, you can just save them in the portable disk. however, it would
be more convenient for you to get them next time with saving the files in your hard drive first.
8. CAUTION:The MP3 player would be shut down if you disconnect the USB DATA CABEL during the
files' are being downloaded.
System Requirements:
1. Intel Pentium III 166MHZ or up processor.
2. The Windows 95/98/98SE are required to download the MP3 driver at WWW.PYLEAUDIO.COM;
The Windows ME/XP/2000 are not required.
3. The free hard disk space of 20MB or up.
4. The RAM capacity of 32MB or up.
5. One USB port available.