Filter
Top Products
8 – Pyle Pro Mixer Owner’s Manual
Using the Microphone
Incorporating Voice into the Mix
To blend voice from the microphone with the audio program material, adjust the turn the MIC 1
Talkover Switch to ON and use the MIC1 level slider to increase or decrease the microphone level.
This will not affect the main volume inputs. When the microphone is not in use, set the MIC level
slider to “0.”
Using the Crossfader
with the Assign
Switches
(PYD-1005)
For crossfading effects, you can assign any of
the three channels to either A or B sides of
the crossfade mix using the Crossfade assign
knobs.
When the crossfade slider is in the center
position, the two assigned channels play equally.
Sliding the control towards the A position will
increase the level of A and fade out B
proportionally to the distance from center.
Likewise, sliding the control towards the B
position will increase the level of B and fade
out A.
Talkover Switch
Crossover Assign
Switches
Talkover Mode
Talkover mode allows a voice to be heard
clearly through the microphone by attenuating
all the other audio input sources. This mode
is engaged by setting the Talkover Switch to
the TALKOVER position. When not using the
microphone, set this switch to the OFF position.