Filter
Top Products
Pyle Pro Mixer Owner’s Manual – 11
Using the “Punch”
Controls (PYD-1005 )
This featured control lets you smoothly and
quickly turn a playing source on and off, or
switch between the two different input sources
assigned to Crossfade Channel A and B.
The effect you get depends upon the position
of the Crossfader.
With the Crossfader at 100% Channel A (all
the way to the left), pressing the Channel A
Punch Button will mute the Channel A material.
Similarly, with the Crossfader at 100% Channel
B (all the way to the right), pressing the
Channel B Punch Button will mute the Channel
B material.
Punch Control
With the Crossfader in the middle position, press the Channel A punch button and the Channel A
material will be subtracted from the mix, leaving only Channel B material. Likewise, press the Channel
B punch button and the Channel B material will be subtracted from the mix.
Using the Sound Effects (PYD-1005)
There are pre-programmed sound effects for your selection. Press and hold any button to generate
a sound which is added to the mix. The sound will play continuously until you release the button.