Filter
Top Products
6
Outputting sound from your
microphone
1. Connect your microphone, and switch on the AC-33’s power.
Connect your microphone to the INPUT jack of the MIC/LINE
CHANNEL.
You can use any one of three types of plugs (XLR, TRS, phone).
You cannot use more than one microphone simultaneously (the TRS/
phone jack will take priority).
XLR type
Phone type
TRS type
2. Set the [VOLUME] knob of the MIC/LINE CHANNEL to the MIC
position.
3. While producing sound, use the [MASTER] knob to adjust the
volume.
Adjusting the tone
1. Use the [BASS] (low range), and [TREBLE] (high range) knobs
of the desired channel to adjust the tone.
Outputting sound from a CD player
1. Connect your CD player (or other audio device), then switch
on the AC-33’s power.
Connect your CD player or portable audio player to the AUX IN jacks
on the AC-33’s rear panel.
R L
2. Set the AUX IN [LEVEL] knob to 5 (center).
3. While producing sound, use the [MASTER] knob to adjust the
volume.
Using headphones
Connect your headphones to the PHONES jack.
If headphones are connected, sound will not be output from the
AC-33’s speakers.