Roland CB-60XL Musical Instrument Amplifier User Manual


 
10
11. [FOOT SW TYPE] Switch (CUBE-120XL BASS only)
This selects the type of foot switch that is connected.
When shipped from the factory, the CUBE-60XL BASS’s FOOT SW TYPE
is set to the momentary type. For details on how to change this setting,
refer to “Using a Latch-type Foot Switch” (p. 11).
* The CUBE’s FOOT SW (foot switch) jacks are
TRS type jacks, and support plugs of the type
shown in the illustration. Use TRS cables to
connect your foot switch.
AUX IN
12. AUX IN Jack
This lets you connect a CD player, digital audio player, electronic
instrument, or other such device and play it at the same time as the
bass.
This accepts a stereo miniature phone plug. However, the speaker
and RECORDING OUT/PHONES output is monaural. Use a cable (sold
separately) that’s appropriate for the device you’re connecting.
* Determine the volume level by adjusting the volume control of the
connected device.
* When connection cables with resistors are used, the volume level
of equipment connected to the AUX IN jack may be low. If this
happens, use connection cables that do not contain resistors.
TIP
RING