Filter
Top Products
4
1. BASS INPUT Jack
Connect your bass here.
2. [PAD] Switch (CUBE-120XL BASS only)
This adjusts the degree of ampli cation in the BASS INPUT circuitry
(the input sensitivity).
Switching this on lowers the input sensitivity (-10 dB).
Switch this on if distortion occurs in this device’s input section as
the result of using basses with high output signal levels or using
connected devices. We recommend that this be switched o for
ordinary use.
3. [COMP/DRIVE] Knob
Turn this knob to COMP (Compression) or DRIVE to switch to that
e ect. Turn the knob to adjust the amount of e ect applied.
You can also turn COMP/DRIVE on and o using optional foot switches.
Knob Position Description
COMP
This e ect evens out the input signal levels, thus
evening out the sound. Turning the knob to the right
increases the compression e ect.
DRIVE
This e ect adds distortion to the sound. Turning the
knob to the right increases the distortion.
The COMP/DRIVE indicator lights up when COMP or DRIVE is on, and
goes out when turned o .
4. [SHAPE] Switch
This e ect alters the COSM amps’ tonal characteristics. The particular
e ect obtained varies according to the amp selected with the Type
switch (6).
5. [TUNER] Switch
Use this when you want to tune your bass. When you turn on the
switch, it will light red, and you’ll be able to use the Tuner function.
For more detailed information, refer to “Using the Tuner Function” (p. 12).
Panel Descriptions
Control Panel
CUBE-60XL BASS
16 17 20 2118 191511 12
1 6 7 8 9 10 223 4 5
5
4
6
7
8
9
10
22
3
1
CUBE-120XL BASS
15 16 17 20 2218 191411 13
1 2 6 7 8 9 103 4 5
5
4
6
7
8
9
10
3
1
2